How to use 5x5

1. First acquire as normal with the 20x20 and wait for one lbwfs readout before proceeding.
2. Halt the LBWFS acquisition loop in the (salmon-colored) ImgAcq tool.
3. Select "11 modes (5x5)" in the pull down.
4. Confirm the 5x5 is in place via the "more" button for LBS on the SCGUI. (If it completes but still says "noname", type 5x5 into the "more" text box and send it again using the "S" send button).
5. Change the integration time (e.g., reduce a 90s value being used for the 20x20 to 30s for the 5x5).
6. Hit Loop in the ImgAcq tool to resume LBWFS correction.