This page contains pictures of the rebonded ZnSe lens. The lens was rebonded by UCLA in early Jan 2017. The first images are of the lens in the Ted special shipping container. Then we have some images of the lens installed in the collimator barrel. Note 1597, 1598, and 1599. These images show the lens in the collimator barrel with and without the baffle installed. The baffles next to the ZnSe lens do not mask out the chip. The chip is visible in the front entrance of the collimator. Image 1599 shows the col2 installed and the chip in col3 is still visible with both baffles installed.
Dwight and Ken are later shown installing the collimator barrel. And then we finally installed bulkhead C.
IMG_1593.JPG
IMG_1594.JPG
IMG_1595.JPG
IMG_1596.JPG
IMG_1597.JPG
IMG_1598.JPG
IMG_1599.JPG
IMG_1600.JPG
IMG_1601.JPG
IMG_1602.JPG
IMG_1603.JPG
IMG_1604.JPG
IMG_1606.JPG
IMG_1607.JPG
IMG_1608.JPG
IMG_1609.JPG
IMG_1610.JPG
IMG_1611.JPG
IMG_1612.JPG
IMG_1613.JPG
IMG_1615.JPG
IMG_1616.JPG
IMG_1617.JPG
IMG_1620.JPG
IMG_1622.JPG
IMG_1623.JPG
IMG_1624.JPG
IMG_1625.JPG
IMG_1626.JPG
IMG_1627.JPG
IMG_1628.JPG
IMG_1629.JPG
IMG_1630.JPG