Tools Required:

• Vacuum cleaner

Procedure:

All filters should be removed from the carousel prior to cleaning.

1. The position of the carousel should be at one of the load stations. If not, do the following:
   • Log in as lriseng and bring up a punaluu xterm window.
   • Type the following command at the punaluu prompt blufload.tcl (This will bring up a small GUI window which allows you to rotate the carousel.)
2. Begin vacuuming each station. Use the blufload.tcl command to rotate to the next station until task is complete.
3. Verify that all of the screws on each of the guide rails are fastened and accounted for. There should be no missing screws.