MAGIQ is the Multifunction Acquisition, Guiding, and Image Quality project. In encompasses both hardware and software. This document is aimed primarily to those instruments with the MAGIQ camera hardware. For all instruments, the MAGIQ software consists of several parts:

• GUIs:
• MagiqGui (OA Gui) -- OA interface
• ObserverUI -- Observer interface
• Camera Diagnostics -- Engineering interface
• MagiqServer -- a top-level server that delivers images to the GUIs and sends commands from the GUIs to the low-level software
• Low-level servers:
• Camera Server -- controls the camera parameters and takes the images
• Mech Server -- controls the moving mechanisms of the MAGIQ system
• Filter Wheel 1 -- holds neutral-density filters
• Filter Wheel 2 -- holds photometric and long-pass filters
• Focus -- allows remote control of guider focus
• Image Quality -- holds a Shack-Hartmann wavefront sensing element

• MAGIQ Server Status
• Basic Software Troubleshooting (html) -- Based on Shui's document (in progress)
• MAGIQ Camera Troubleshooting and Recovery Procedures (PDF) -- Shui's more complete document

ObserverUI:
1. Right click in background menu
2. Guider Eavesdropping
3. MAGIQ Menu
4. Start ObserverUI

Check Server Status:
1. Point web browser to: MAGIQ Server Status (http://www.keck.hawaii.edu/observing/magiq/index.php)

MagiqServer, MagiqGui (OA Gui), Diagnostic Gui, ObserverUI:
1. Start a DCSGUI as kNobs on kNserver
2. Select desired program from "DCS" -> "MAGIQ" menu

MagiqServer (OAs/SAs/support only):
1. login as kNobs to kN-magiq-server
2. magiq start MagiqServer

MagiqGui (OAs/SAs/support only):
1. login as kNobs to kN-magiq-server
2. magiq start MagiqGui

ObserverUI:
1. login as kNobs to kN-magiq-server
2. magiq start ObserverUI

WWW Keck Web Site